Trying to load tidyverse package and get it to run

[cendres]

I am trying to run an R script that uses data from an oracle table. I have ROracle installed and it appears to be working. When the script tries to load the library(tidyverse), I get this error

#Loading the libraries I need

library(ROracle)
library(tidyverse)
Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
there is no package called ‘rlang’

I then install.packages("rlang") and run the script again and get this error
#Loading the libraries I need

library(ROracle)
library(tidyverse)
Error: package or namespace load failed for ‘tidyverse’ in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]):
there is no package called ‘hms’

So I then install.packages("hms"). I run the script again, and get the first error again. And it keeps going in this cycle and I cannot get tidyverse to run.

Any help?!

[jim89]

Hi @cendres, welcome to the community!

It looks like you have some missing dependencies, possibly from a problem that didn't cause an error the first time you installed the tidyverse package. Can you try re-installing using install.pacakges("tidyverse", dependencies = TRUE)?

[cendres]

Hi Jim89,

No it did not work. The package loaded but I am still getting the same errors. Could it be something wrong with the PATH or the user environmental variable? or is that way off?

[jim89]

That seems unlikely, are you able to share the full output you get when you re-install? It's possible that the installation is not going wrong enough to cause a major error, but not installing everything you expect it to.

[cendres]

It won't let me share my whole script output. I cut out the "trying URL" lines hoping it will send. It keeps saying I can only share 2 links.

install.packages("tidyverse", dependencies = TRUE)
also installing the dependencies ‘ellipsis’, ‘processx’, ‘vctrs’, ‘callr’, ‘hms’, ‘reprex’, ‘rlang’


  There are binary versions available but the source versions are later:
         binary  source needs_compilation
ellipsis  0.1.0 0.2.0.1              TRUE
processx  3.3.0   3.4.1              TRUE
vctrs     0.1.0   0.2.0              TRUE
callr     3.2.0   3.3.1             FALSE
hms       0.4.2   0.5.1             FALSE
reprex    0.2.1   0.3.0             FALSE
rlang     0.3.4   0.4.0              TRUE

  Binaries will be installed

package ‘ellipsis’ successfully unpacked and MD5 sums checked
package ‘processx’ successfully unpacked and MD5 sums checked
package ‘vctrs’ successfully unpacked and MD5 sums checked
package ‘rlang’ successfully unpacked and MD5 sums checked
package ‘tidyverse’ successfully unpacked and MD5 sums checked

The downloaded binary packages are in
	C:\Users\corinne.endres\AppData\Local\Temp\1\RtmpSO6JUE\downloaded_packages
installing the source packages ‘callr’, ‘hms’, ‘reprex’

* installing *source* package 'callr' ...
** package 'callr' successfully unpacked and MD5 sums checked
** R
** inst
** preparing package for lazy loading
Error in loadNamespace(j <- i[[1L]], c(lib.loc, .libPaths()), versionCheck = vI[[j]]) : 
  namespace 'processx' 3.3.0 is being loaded, but >= 3.4.0 is required
ERROR: lazy loading failed for package 'callr'
* removing 'C:/Users/corinne.endres/Documents/R/R-3.4.4/library/callr'
In R CMD INSTALL
Warning in install.packages :
  running command '"C:/Users/CORINN~1.END/DOCUME~1/R/R-34~1.4/bin/x64/R" CMD INSTALL -l "C:\Users\corinne.endres\Documents\R\R-3.4.4\library" C:\Users\CORINN~1.END\AppData\Local\Temp\1\RtmpSO6JUE/downloaded_packages/callr_3.3.1.tar.gz' had status 1
Warning in install.packages :
  installation of package ‘callr’ had non-zero exit status
* installing *source* package 'hms' ...
** package 'hms' successfully unpacked and MD5 sums checked
** R
** preparing package for lazy loading
Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) : 
  namespace 'vctrs' 0.1.0 is being loaded, but >= 0.2.0 is required
ERROR: lazy loading failed for package 'hms'
* removing 'C:/Users/corinne.endres/Documents/R/R-3.4.4/library/hms'
In R CMD INSTALL
Warning in install.packages :
  running command '"C:/Users/CORINN~1.END/DOCUME~1/R/R-34~1.4/bin/x64/R" CMD INSTALL -l "C:\Users\corinne.endres\Documents\R\R-3.4.4\library" C:\Users\CORINN~1.END\AppData\Local\Temp\1\RtmpSO6JUE/downloaded_packages/hms_0.5.1.tar.gz' had status 1
Warning in install.packages :
  installation of package ‘hms’ had non-zero exit status
ERROR: dependency 'callr' is not available for package 'reprex'
* removing 'C:/Users/corinne.endres/Documents/R/R-3.4.4/library/reprex'
In R CMD INSTALL
Warning in install.packages :
  running command '"C:/Users/CORINN~1.END/DOCUME~1/R/R-34~1.4/bin/x64/R" CMD INSTALL -l "C:\Users\corinne.endres\Documents\R\R-3.4.4\library" C:\Users\CORINN~1.END\AppData\Local\Temp\1\RtmpSO6JUE/downloaded_packages/reprex_0.3.0.tar.gz' had status 1
Warning in install.packages :
  installation of package ‘reprex’ had non-zero exit status

The downloaded source packages are in
	‘C:\Users\corinne.endres\AppData\Local\Temp\1\RtmpSO6JUE\downloaded_packages’

[EconomiCurtis]

Similar error messages and suggested solutions posted here

Cannot install devtools, need to update processx version

I came across this same issue (and found this thread looking for a solution via Google-fu). Reinstall Rtools (from https://cran.r-project.org/bin/windows/Rtools/). As mentioned above, devtools was failing due to callr issues, which came from processx. I tried updating processx 3-4 times, but got a "WARNING: Rtools is required to build R packages but is not currently installed. Please download and install the appropriate version of Rtools before proceeding:" error. Once I updated Rtools, everything worked fine.

[jcblum]

@cendres

I cut out the "trying URL" lines hoping it will send. It keeps saying I can only share 2 links.

Hi @cendres! If you format the output as code, then it won't trigger these anti-spam measures in the forum software. It's a good idea to always format your console output as code since it's more readable that way and avoids various other garbling that can occur. Here's how:

FAQ: How to format your code

Formatting Code: the Basics All code or console output you include in your posts should be formatted properly. Luckily, this is very easy to do! Just use the code formatting button at the top of the post editing box: [image] Select some code Click the </> button! The code formatting button automatically adds special Markdown formatting symbols to whatever you selected. If you check the preview pane to the right of your post, you'll see that the forum software now outputs nicely formatted code . [04] The code formatting button is pretty smart! It can tell the difference between snippets of code that are part of a sentence and blocks of code that stand alone. …